Cipher Lab 8000 Series Spécifications télécharger pdf (Page 43)

Chapter 3 System Menu

3.3 TESTS

Here provides functional tests for key parts.

3.3.1 READER

Test the reading performance of the scanner. The supported symbologies depend on the

scan engine you use. Refer to

1.6 Data Capture for symbologies that are enabled by

default. For symbologies that are disabled by default, they must be enabled through

programming.

 Press [SCAN] to start. To stop and exit the test, press any key.

3.3.2 BUZZER

Test the buzzer with different frequency/duration combinations.

 To stop and exit the test, press any key.

3.3.3 LCD & LED

Test the LCD display and LED indicator.

 To stop and exit the test, press any key.

3.3.4 KEYBOARD

Test the rubber keys. Press any key and its corresponding character will be shown on the

screen.

 To stop and exit the test, press [ESC].

3.3.5 MEMORY

Test the data memory (SRAM), and the results will be shown on the screen.

 To stop and exit the test, press [ESC].

Warning! The contents of the data memory (SRAM) will be wiped out after test.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 90 91

Pas de commentaire

Cipher Lab 8000 Series Spécifications Page 43